Recovery Emporium
* * * * * * * * * * * *
HOME   Discount Code Entry   View Cart   Shipping Info   Contact Us
Toll free: 1.888.798.3496 Hours: M-F 10AM - 4PM Eastern USA Time
We ship U.S.P.S. Mail - within 24 Hours of receiving your order - M-F
RecoveryShop.com Item quantities may be changed on the 'View Cart' page.
$ 5.00 S&H charge on all orders. Added charges for out of country or expedited orders.
*Main Shopping Page*
Medallion Holders - Universal Holder - Various Holders
 Wood Medallion Holders - Desktop and Wall Plaques HERE

  Fancy Medallion Gift Boxes HERE

Our own creation - a truly Universal Medallion Holder - No Screws!
Holds any thickness of recovery medallions - 1 -5/16" diameter.
In gold only.  All nickel plate are gone.
4/24/08 - There has been a total CRASH on the order for more nickel plated holders. :-(
5/1/8 - They've been ordered again.  Hopeful of arrival around 7/1/8.
 To  order -  CLICK HERE
 Copyright © Lyle P. Parkins - 09/01/2004 - All Rights Reserved - Patent Pending.
NOTICE:  The reason behind the Universal Medallion Holder above is to resolve the problem of the typical ring
medallion holders ( below ) being slightly too small or too large for various medallions made by various manufacturers.
Most all recovery medallions are 1- 5/16" in diameter.
Though their minor differences make a great deal of difference with fit of medallion holders.
-  -  -  -  -  -  -

 The most common problem with the less expensive holders below is a slightly loose fit.
 We suggest a touch of white glue ( ex: Elmer's ) placed in the holder prior to
 installing the medallion.  Any cushioning material like a tiny piece of paper may work well also.

Screw Top Cap
with figure 8 split ring
Gold Tone - # 13
or
 Silver Tone - # 14
$ 4.50
  DO NOT
 OVER TIGHTEN
 NO REFUNDS ON
 STRIPPED THREADS 		Screw Top Cap
with chain & split ring
Gold Tone - # 15
$ 4.50
  DO NOT
 OVER TIGHTEN
 NO REFUNDS ON
 STRIPPED THREADS 		Screw Top Cap
with chain & split ring
 Silver Tone - # 16
( Chain is slightly
different from  # 15 )

$ 4.50
 DO NOT
 OVER TIGHTEN
 NO REFUNDS ON
 STRIPPED THREADS 		Screw Cap
with necklace.
Gold Tone - # 17
or
Silver Tone - # 18
$ 4.50
  DO NOT
 OVER TIGHTEN
 NO REFUNDS ON
 STRIPPED THREADS 		With chain

Rope Design
Gold Plate - # 19
or
  Nickel Plate - # 20
$ 15.00
  DO NOT
 OVER TIGHTEN
 NO REFUNDS ON
 STRIPPED THREADS 		Chain & split ring

Rope Design
Gold Plate - # 21
$ 15.00
  DO NOT
 OVER TIGHTEN
 NO REFUNDS ON
 STRIPPED THREADS

Gold Tone
Med Hold  # 13
$ 4.50 each
 <Enter Quantity
Click >

Silver Tone
Med Hold  # 14
 $ 4.50 each
 <Enter Quantity
Click >

Gold Tone
Med Hold  # 15
$ 4.50 each
 <Enter Quantity
Click >

Silver Tone
Med Hold  # 16
$ 4.50 each
 <Enter Quantity
Click >

Gold Tone
Med Hold  # 17
$ 4.50 each
 <Enter Quantity
Click >

Silver Tone
Med Hold  # 18
$ 4.50 each
 <Enter Quantity
Click >

Gold Plate
Med Hold  # 19
$ 15.00 each
 <Enter Quantity
Click >

Nickel Plate
Med Hold  # 20
 <Enter Quantity
Click >

Gold Plate
Med Hold  # 21
$ 15.00 each
 <Enter Quantity
Click >

 Protection & display for
most all medallions.
A few Tri-Plates are a bit
too thick for these.
( BSP™ + select "Saying"
Tri-Plate medallions.

ALL BRONZE, SILVER, GOLD, &
"RAINBOW" MEDALLIONS FIT.
Contact us to confirm
 if you are unsure of fit.
 It's a matter of thickness
 - not diameter.
Remove by:
Carefully! & gently
prying a sharp knife edge
around side seam.

 To order:
 Click on TOP photo
 $ 1.25 ea.

 Example:
 in use - below

Simple paper
and Mylar window
coin holders.
Staple shut.
2" x 2"
Lightweight
cardboard.
1-1/2" diameter
window.

A few customers
wanted these...
so...
  		  ONLY FOR
THICK MEDALLIONS
 such as acrylic coated
 "Tri-plates"
  ONLY FOR
THICK MEDALLIONS
  such as acrylic coated
 "Tri-plates"
"Air-Tite" Capsule
Medallion Holder
Click On Photo
To Order

  $ .75 Cents
Clear Plastic & Gasket
Precision Fit - Air Tight		 Stand for "Air-Tite"
Capsules & Medallions

Click On Top Photo
To Order
  $ 1.25

Med Holder - 34
 $ .20 each
<Enter Quantity
Click >

  Med Holder - 11
Click On Photo
To Order

 $ 12.00
 Gold Plated 
24" Chain		 Med Holder - 12
Click On Photo
To Order

 $ 12.00
 Gold Plated 
4" End to End

Medallion Holders
# 25-Black  #26-Brown		  BLACK - Leather - with soft pliable window.

$ 8.50 each -  Enter Quantity  >    Click > 

BROWN - Leather - with soft pliable window.

$ 8.50 each -  Enter Quantity  >    Click >     

Medallion Holders
# 27-Black  # 28-Brown		  BLACK - Leather - with soft pliable window.

$ 8.50 each - Enter Quantity  >    Click > 

BROWN - Leather - with soft pliable window.

$ 8.50 each -  Enter Quantity  >     Click > 


Key Fob 18
Medallion Not Included		  
Dark Brown Leather 2 " Round  /  1/8" Thick     .66 oz.     ( Key Ring is 1-1/8" )

$ 8.50 ea.   >       Key Fob 18

Key Fob 20
Medallion Not Included		 Dark Brown Leather
2 "  x  2-1/2"  /  1/8" Thick     .43 oz.     ( Key Ring is 1-1/8" )

$ 8.50 ea.   >        Key Fob 20

Key Fob 32
Medallion Not Included		 Dark Brown Leather
Riveted with side snap - where coin is inserted.
 2 "  Round  - 1/8" Thick   .37 oz.     ( Key Ring is 1-1/8" OD )

$ 8.50 ea.   >       Medallion Holder 32









Available in 4 Colors
 Leather Medallion Holder with Left Side Storage Pocket
   
Available in 5 Colors:  Red-ish  :-)  -  Dark Brown  -  Black  -  Light Blue -  Tan
- Embossed Circle/Triangle    - Gold Stamped: Living One Day At A Time
- Removable Key Tag Chain/Ring      - Velcro Pad Tab Closure
2 " x  2-1/4"  /   1/2" Thick   -   Key Ring is 7/8 inch in diameter.

Red Leather     $ 8.50 ea.   >       Medallion Holder 29

Brown Leather     $ 8.50 ea.   >  Out of Stock     Medallion Holder 30

Black Leather     $ 8.50 ea.   >        Medallion Holder 31

Light Blue Leather     $ 8.50 ea.   >  Out of Stock

Tan Leather      $ 8.50 ea.   >        Medallion Holder 33

> Wooden Medallion Holders - Desktop and Wall Plaques